Our G80 Hooks are manufactured from G80 alloy steel, quenched and tempered, suitable for g80 chain. Individually proof test at 2.5 times working load limit. Fatigue treated at 1.5 times working load limit for 20000 cycles. And these have the Breakage test. We have different hooks for different applications. Self-Locking Hook allows the hook to remain open until the load is engaged. The hook will not open until the trigger at the back is pressed. G80 Weld On Hooks are designed for attachment to mobile lifting equipment to provide a pick point for easy sling attachment. A grab hook has a narrow throat allowing it to grab a link of the chain and prevent it from slipping. G80 Foundry Hooks have wide throat opening which makes them capable of fitting around many large objects. G80 Sling Hook are a general purpose hook, suitable for most slinging applications.

Features:

♦Forged super alloy steel- Quenched and Tempered

♦The most complete line of Eye hoist hooks.

♦Available in carbon steel and alloy steel.

♦Designed with a 5:1 Design Factor for (Carbon Steel); 4:1 Design Factor for (Alloy Steel).

♦Eye hooks are load rated.

♦Proper design, careful forging and precision controlled quenched and tempering give maximum strength without excessive weight and bulk.

♦Every Crosby Eye Hook has a pre-drilled cam, which can be equipped with a latch. Even years after purchase of the original hook, latch assemblies can be added.

♦Chemical analysis and tensile tests performed on each PIC to verify chemistry and mechanical properties.

♦Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.

♦Hoist hooks incorporate two types of strategically placed markings forged into the product, which address two (2) QUIC-CHECK® features: - Deformation Indicators and Angle Indicators.